The forklift trucks, series DV / GV, are reliable for operation on solid and flat surface and ambient temperature between 25 and +35o C. For indoor performances we install an LPG fueled IC engine, model D 3900 Gas. The general purpose diesel forklift trucks, series DV / GV, are range of lifters with load capacity 2.0, 2.5, 3.0, 3.5, and 4.0 tons and lifting height 3300, 4000 and 4500 mm. FLT are generally equipped with forks that could be replaced by various other attachments for specialized or enhanced use – side-shifter, fork positioner, rotating devices, clamps, fork extensions etc.

Chassis It is a tough welded steel construction, maximum stiff, ensuring good protection, free approach for maintenance of the assemblies and components and long life of the truck itself.   Drive axle It is a firm cast steel beam, containing main conic spiral spur gear, a differential gear and final one stage reduction gears.   Steering Axle It is a substantial and secure construction. It consists of a firm steel beam, double-action piston cylinder and classical ball joints. Power-shift transmission The power-shift transmission is one-speed, series HDP 6860. The built-in inching valve, operated by the brake pedal, ensures slow motion when precise maneuvering needed.   Electric system The operation voltage is 12 V. On the control panel are located indicators: for the cooling liquid temperature; fuel level; control lamps for charging the accumulator, oil pressure in the engine and direction indicators; Engine The engine is D 3900 K (diesel) or D 3900 Gas (LPG), four-stroke, water cooled; displacement 3.86 l; power 57 kW at 2500 min-1; maximal torque 250 Nm at 2500 min-1. Hydraulic system and steering A separate spur pump provides pressure for the operation hydraulic. The oil-tank volume is quite enough even if the truck would be equipped with forklift attachments. Safety valves assure slow lowering of the load even with a hydraulic hose torn. Another spur pump provides pressure for the servo-amplified hydraulic steering system. Lifting mast This assembly is a welded construction made of hot-rolled high-strength profile steel. It is simplex type and provides clear view for the operator. It consists of two-stages, two hydraulic cylinders on both sides of the static mast, low free lift. Technical specifications